Littlite LLC, Hamburg MI 48139 USA 1-810-231-9373, FAX 810-231-1631, sales@littlite.com

Replacement Bulbs

The 1815 is cool and the Q5 is a gas.

Q5
5-watt, 12-volt 380mA tungsten-halogen bulb. (Use with High Hood only.)

---

1815
2.4 watt, 12-volt 230mA incandescent bulb.

---

Mounting Accessories

What good is a light if you can't put it where you want it? We thought so too so we got busy and whacked together the following accessories that will clip, clamp, stick or set a Littlite wherever you need one.

CWB
NEW! CWB (Cast Weighted Base). Turn your Littlite lampset* into a desk light. new improved design features four rubber feet for maximum stability.


*(CWB will not work with L-7 series lampsets.)

---

HTC - High Tension Clamp
Attach a Littlite to this beauty with screws provided or with a Snap Mount and clip away. Keeps those chips fresh too!


Instruction Sheet

---

RAKIT- (Rack It)
Piggyback a Littlite L-series lampset to your rack without hogging any rack space!

The new Littlite Rakit can also be used as a universal bracket to mount a Littlite on just about any surface.

RAKIT Up Close

---

MB - Magnetic Base
It’s a base. . .with a magnet. Stick it to the bottom of your Littlite and then stick the whole shebang to something made of steel.

---

SM - Snap Mount
Two-piece, self-adhesive backed fastener type stuff. (Say that three times fast.)

---

PS - Panel Socket
BNC panel socket for detachable G-series gooseneck.

---

PS-T
TNC panel socket for detachable T-series gooseneck.

---

CL - Adjustable Clip
Clip your Littlite to edges 1/16” thin to 7/8” thick.

---

MP - Mounting Plate
Metal plate for installing a DM, PS or P series gooseneck.

---

MP-2 - Dual Mounting Plate
Designed for a P or G series gooseneck and DM dimmer.

---

XLR-PS3 - 3 Pin XLR Panel Socket
Panel socket for detachable X and XR series gooseneck.

---

XLR-PS4 - 4-Pin XLR Panel Socket
Panel socket for detachable X and XR series gooseneck.

---

Power Supplies and Stuff

WYE
New accessory cable connects two Littlite lampsets to a single power supply.

---

EXT
Six-foot extension cable for GXF-10 and EXF-10G power supplies.

---

CP-2
New cigarette plug with 2/1mm connector powers any Littlite lampset from a 12-volt, cigarette plug style power point. Replaces the CP.

---

GXF-10
Smaller, lighter, and more energy efficient. Our GXF-10 power supply, a replacement for our WXF and WXF-10 transformer, has a six-foot cable terminating in a 5.5 x 2.1mm coaxial connector.

This 12-volt, 1 Amp power supply will power up to two High-Intensity goosenecks (use our WYE cord) or up to four Low Intensity or LED goosenecks (use the PYE cord).

---

EXF-10G
Smaller, lighter, and more energy efficient. Our Euro-style EXF-10G power supply, a replacement for our EXF transformer, has a six-foot cable terminating in a 5.5 x 2.1mm coaxial connector.

This 12-volt, 1 Amp power supply will power up to two High-Intensity goosenecks (use our WYE cord) or up to four Low Intensity or LED goosenecks (use the PYE cord).


Note: Older Littlite Euro-Style lampsets used a 2.5mm connector. This is now replaced with the 2.1mm connector.

---

PYE
New accessory cord to connect up to four Low Intensity or LED goosenecks to a single GXF-10 or EXF-10G power supply. Not recommended for use with High Intensity goosenecks.

---

LAD
2.1mm to bare end cable for connecting GXF-10 Switching Power Supply to PS, PS-T, XLR-PS3, XLR-PS4 and P-series goosenecks.

---

GAD
Adapter cable enables use of GXF-10 and EXF-10 with older lampsets with spade lug power connections.

---

BA
New Accessory cable. . . power your Littlite lampset from a BNC-style 12-volt connector! Use those unused connectors on your sound consoles.

---

RD
Replacement dimmer for all L-series lamp sets. 5-watt maximum.

---

DM
Dimmer with “off” position. 10 watt maximum. Not a replacement dimmer for L-series lamp sets! Use our RD instead.

---

LV
12-volt hookup kit includes fuse and holder, connectors, line taps and instructions.

---

LK
Replacement knob for Littlite dimmer.

---

LDC-1
Littlite Dimmer Controller. Provides dimming control for multiple Littlite lampsets in any combination of High Intensity, Low Intensity and LED up to a 1 Amp draw.

Operate on input voltage of 12-28 VDC. Standard 2.1mm connectors for power supply input and output to lights. Use our PYE, WYE and EXT cords to connect the LDC to Littlite lampsets.

LDC-1: End-out cords

Instruction Sheet

---

LDC-2
Littlite Dimmer Controller. Provides dimming control for multiple Littlite lampsets in any combination of High Intensity, Low Intensity and LED up to a 1 Amp draw.

Operate on input voltage of 12-28 VDC. Standard 2.1mm connectors for power supply input and output to lights. Use our PYE, WYE and EXT cords to connect the LDC to Littlite lampsets.

LDC-2: Bottom out cords

Instruction Sheet

---

EAD
EAD is used to connect EXF transformer to older lampsets with spade lug connectors. Will not work with EXF-10G, see our GAD to connect new power supplies with older lampsets.

---

Hoods

HH
High Hood with replacement O-rings. Use with L-3 and L-4 lamp sets and all high intensity series goosenecks.

---

LX
X-series hood with replacement O-rings. Use with X and XR series goosenecks.

---

LH
Low Hood with replacement O-rings. Use with L-1 and L-2 lamp sets and all low intensity goosenecks.

---

HIC
High Intensity Conversion Kit. Includes High Hood, Q5 bulb and O-rings.

---

HLK
Hood Locking Kit prevents removal of High Hood.

---

Other Things . . .

GPK
Transforms any G-series gooseneck into a complete lamp set. Comes complete with power supply, snap mount and mounting kit. Dimmer will not work with G-LED goosenecks.

---

GPK-T
Transforms any T-series gooseneck into a complete lamp set. Comes complete with power supply, snap mount and mounting kit. Dimmer will not work with T-LED goosenecks.

---

CF
Color Filter kit. Includes one each of red, clear and blue. For use with High Hood. Will not fit X-series hoods without modification.

---

NVF-RED
Red color filter. Packaged in a set of three. For use with High Hood. Will not fit X-series hoods without modification.

---

NVF-BLUE
Blue color filter. Packaged in a set of three. For use with High Hood. Will not fit X-series hoods without modification.

---

NVF-CLEAR
Clear color filter. Packaged in a set of three. For use with High Hood. Will not fit X-series hoods without modification.

(Look closely, they're in that picture somewhere.)

---

L-1
Replacement chassis for L-1 and L-4 series lamp sets. No power supply or accessories just in case you already have that stuff.

---

SC
Storage clips for detachable goosenecks. Sold in pairs. Mounts with screws (provided).

---

XC
Storage Clip for X and automotive series goosenecks. Mounts with self-adhesive backing.

---

O-KIT
Spare O-rings packaged in quantities of 12. For use with High and Low series hoods.

---

O-KIT-X
Spare O-rings packaged in quantities of 12. For use with X series hoods.

---